Yagi-logper The log-periodic antenna is an easy to install antenna that provides good performance over a wide range of applications. Yagi-logper 2022 Crack is a command line application that you can use to determine the impedance of log-periodic or Yagi antennas. Yagi-logper provides support for NEC2 format and calculates the excitation gap, the amplitude values, the input impedance and the total power. Yagi-logper Description: This script has been developed to aid students who want to quickly determine the correct size of whip antenna for their application. The aim of this free script is to make antenna design easier for those with little knowledge or time to design an antenna for their application. The IEEE 802.11 standard provides a flexible infrastructure that enables an unlimited number of WLANs and offers the option of Wi-Fi or WiMAX depending on the number of base station connections needed. For managing the connections of the wireless access points from a central point (command center) it is convenient to use a dashboard application. This application is available for Windows, Mac and Linux platforms, supports WPA and WPA2 security and provides the possibility to select the access point name, the password and the AP state (connected or not connected). The application is lightweight and easy to use, you can configure up to 10 WLANs. Is an application that supports you to automatically detect the wireless network device using a driver that it installs. This means that you can safely to work without the need to configure the wireless network device manually. The application automatically searches for available wireless network device according to its driver in order to show a list. Doesn't support the so-called "bumpers" connected to the radio. If they are needed, you must manually enter them on the tab "Properties". This means that in many cases the driver has no data about the bumper and you can't add it to the list automatically. This is a Free Antenna simulator for FLAGWAVES Radio. Have Fun with a free and simple Antenna simulator. Features: -Only uses ASCII art. -Loads a 6 or 12 element band antenna into the Arduino IDE. -Selects the correct driving point for the specified band. -Included UNIX shell script for connecting the Arduino IDE to FLAGWAVES Radio. This is a Free Antenna simulator for FLAGWAVES Radio. Have Fun with a Yagi-logper Crack + License Code & Keygen Yagi-logper is a command line application. It requires that you run it on a Linux system that has Python, numpy, and pylab installed. Yagi-logper is free software, distributed under the terms of the GNU GPL v3. Yagi-logper can be used for academic, educational, or non-commercial use. Credits: This work is the result of collaborations with: John Friis, Michael Genrich, Michael W. Preston, Colin O'Connor, Preston Lane. The original idea of the software came from Preston Lane. License: GNU General Public License version 3 (GPLv3) See the README.txt file for further information. ======================================================================= Introduction ======================================================================= The project goal is to provide users with an open source tool that can be used to easily calibrate antenna models and perform simulation of antenna behavior. Yagi-logper is not a specialized antenna modeling tool. Yagi-logper's primary focus is to provide convenient interface to NEC2 models for those who are already using NEC2 models for their antenna simulations. By providing a convenient interface, Yagi-logper makes it easier for users to quickly determine antenna impedance, and carry out antenna simulations. Yagi-logper uses NEC2 software ( as the base for its model. If you are interested in using Yagi-logper with your antenna model then you should be familiar with NEC2 and how it works. Yagi-logper performs the calculations for the antenna model. Thus, to use Yagi-logper you should already have your antenna model (including a circuit diagram) as a "circuit" in NEC2. For example, here is a circuit diagram of a log-periodic antenna: .. code-block:: neccode 1a423ce670 Yagi-logper Crack (LifeTime) Activation Code showca - prints the current amplitude of the input signal showgap - prints the excitation gap of the log-periodic antennas The characteristics are the following: The pulse is displayed in function of its amplitude The position on the screen is displayed by coordinates The horizontal distance between the axis origin and the position on the screen corresponds to the amplitude value The vertical distance between the axis origin and the pulse corresponds to the position on the screen The length of the horizontal scale corresponds to the amplitude value and the length of the vertical scale corresponds to the vertical position on the screen showca : showgap : Output will vary in function of the model of the log-periodic antenna. TransmitLogPeriodicAntenna.exe is an open source freeware with source code, a.NET application which is able to calculate and plot the S11, S21, S31, reflection, isolation, VSWR and the impedance of a log-periodic antenna. The tool can be used for the first time to see how the antenna behaves in a vertical polarization system. Output will vary in function of the model of the log-periodic antenna. It will be possible to simulate different types of antennas (like Yagi, log-periodic, radial, Yagi-Armstrong, Diridum) to make the right choice for the application. If you are using a vertical polarization, you should select the frequency. When you reach the end of the spectrum, click on the button “Center frequency”, the tool will adapt the frequency to be the central frequency and display a spectrum plot in the middle of the graph. TransmitLogPeriodicAntenna.exe provides the simulation of log-periodic antennas thanks to the implementation of the link in the “virtual world”, which makes it possible to evaluate the performance and the characteristics of the antenna. Open source application can be used for many applications like: The possibility to receive the information given by the antenna without the use of a multimeter To evaluate the balance of the antenna TecnicaLite is an open source freeware, web and windows application for creating and calculating log-periodic antennas. The tool is easy to use and allows you to create a log-periodic antenna quickly and with the minimum of programming. The program is completely free and all information generated will be displayed in the application as a window, on the screen or on What's New In Yagi-logper? System Requirements For Yagi-logper: OS: Windows 7/8/8.1/10 Processor: Intel(R) Core(TM) i3-2100 3.10 GHz or better Memory: 8 GB Hard Drive: 500 GB Graphics: NVIDIA GeForce GTX 750 or better, AMD Radeon HD 7850 or better, Intel HD Graphics 2000 or better DirectX: Version 11 Network: Broadband Internet connection Keyboard and mouse are required to play. Internet connection and installation is required for download of game. You
Related links:
Commentaires